Güneş PV panelleri için üst 3 silikon levhalar kauçuk membranlar laminasyon

Top 3 Silicone Sheets & Rubber Membranes For Solar PV Panels Lamination

 

As technology progresses, Deer Hunter has introduced the top 3 silicone sheets for solar PV panels lamination. Bunlar 2nd   Gen - 5th   Gen - ve 5th-lite Gen . The solar silicone membranes are mainly designed to protect the PV panels and the lamination equipment in extreme temperatures.

 

In the process of solar photovoltaic panels laminations, the panel manufacturers encapsulate   all components with ethylene-vinyl acetate (EVA) adhesive film to ensure that module layers remain secure. That will cause high heat to melt the EVA (typically 145-155 ° C). That ' s why those makers need our   flexible, resilient, and durable silicon sheets designed   for use in the solar   laminators   to provide compression on the PV panes   in repeated cycles.

 

Deer Hunter has worked in partnership with the foremost solar laminator manufacturers to develop silicon rubber membranes that meet the specific requirements of PV modules manufacturing.   Here it is our great honor to introduce the top 3 silicon sheets to you.

 

The 5th   Gen   is a specially developed membrane consisting of a silicone backing material and a unique covering layer. This covering layer is extremely resistant to outgassing and related decomposing processes of EVA films. This makes   our membrane   particularly durable and increases your machine running times.

It   has an EVA resistant fluorine laminated surface with additional fabric reinforcement.

Yapı

1# Black EVA resistant fluorine - working layer

2# Grey silicone

3# 1 Ply premium aramid fabric reinforcement

4# Grey silicone - buffering layer

Product descriptions   and advantages

*1 piece seamless sheet width up to 3800mm wide (no weak joints or marks on lay-up)

*Good cycle life   - more than 10,000 cycles

*Good reusability & durability when exposed to high pressures & elevated temperatures: +250 ° C

*Special fluorine   covering layer (black) on silicone backing (grey)

*Bond of the two layers cannot be separated mechanically

*Black covering layer is resistant to decomposing   eva   outgassing   during the lamination process

Teknik veri:

Malzeme	Silicone/FKM
Renk	Gri siyah
Yüzey	Smooth/Textured
Reinforcing Layer	1 Ply Premium Grade Aramid Fabric
Sertlik	EVA Resistant Working Surface (Black FKM)	Buffering Surface (Grey Silicone)
	70+/-2 Shore A	60+/-2 Shore A
Yoğunluk	1.95 ± 0.05g/cm3	1.25 ± 0.05g/cm3
Gerilme direnci	14MPa	8.5MPa
Tear Strength	45N/mm	30N/mm
Temperature resistance	250 ° C	250 ° C
Uzama	600%	180%
Sıkıştırma seti	4%	4%
Dayanıklılık	8%	25%

 

The 5th-lite   Gen   is an exclusive laminate produced from a unique pressed composition giving extended life in solar panel production.

It   has an EVA resistant fluorine laminated surface with additional fabric reinforcement.

Yapı

1# Black EVA resistant hybrid - working layer

2# 1 Ply premium aramid fabric reinforcement

3# Grey silicone - buffering layer

This brand new model gives users many benefits including :

* Recommended operating temperature: +250 ° C

* Anti-ageing + acid & alkali resistance

* Extended life - more than 8,000 / 10,000 cycles

* Special hybrid covering layer bonded onto silicone backing

* Inseparable layers

* Special layer resistance to corrosive eva outgassing

 

Teknik veri:

Malzeme	Silicone/Hybrid
Renk	Gri siyah
Yüzey	Smooth/Textured
Reinforcing Layer	1 Ply Premium Grade Aramid Fabric
Sertlik	EVA Resistant Working Surface (Black Hybrid)	Buffering Surface (Grey Silicone)
	70+/-2 Shore A	60+/-2 Shore A
Yoğunluk	1.95 ± 0.05g/cm3	1.25 ± 0.05g/cm3
Gerilme direnci	14MPa	8.5MPa
Tear Strength	45N/mm	30N/mm
Temperature resistance	250 ° C	250 ° C
Uzama	600%	180%
Sıkıştırma seti	4%	4%
Dayanıklılık	8%	25%

 

Deer Hunter ' s grey solar membranes are well known throughout the industry for its consistency and durability. With high tear and temperature resistance, these diaphragms are in use worldwide on the full variety of module laminators.

 

The 2nd   Gen   is our original & most popular silicon sheets for solar panels lamination – combining hi-elongation, good life cycle performance under controlled environments and very competitive pricing. It ’ s available with both sides smooth or single-sided fabric impression surface finish.

The 2nd   Gen Silicone Membrane is our well-proven standard product.

Yapı

1# Grey silicone

2# 1 Ply premium aramid fabric reinforcement

3# Grey silicone

Availability and technical Features:
- Seamless (no weak point)
- Standard thickness 4 mm available
- Long lifetime resulting in increased service
- High stability
- Compression and temperature resistant + 250 ° C
- Low-priced
- Gri renk

- 1 Ply premium grade aramid fabric reinforcement

 

Teknik veri:

Malzeme	Silicone
Renk	Gri
Yüzey	Smooth/Smooth or Smooth/Textured
Reinforcing Layer	1 Ply Premium Grade Aramid Fabric
Sertlik	70+/-2 Shore A
Yoğunluk	1.25 ± 0.05g/cm3
Gerilme direnci	12.5MPa
Tear Strength	48N/mm
Temperature resistance	250 ° C
Uzama	600%
Sıkıştırma seti	2%
Dayanıklılık	30%

 

Package

To protect the top 3 silicone sheets from any damage during transportation, solid cardboard tubes are commonly used.

To get more information about silicon sheets for solar panels lamination,   please contact me   by email   sales@cndeerhunter.com

Mobile/Whatsapp/Wechat: +86-13823789007
Skype: FULLCHANCE100